After entering the setting pre-positioning interface, when the needle first touches the laser beam in the x- and y-axis directions, the corresponding axes will stop moving. Therefore, when setting the pre-positioning, first move the needle to point a, and move the z-axis downward to ensure that the needle is lower than the laser beam in the xoy plane to control the x-axis. Epos4 generation canopen position controller. Not only can it provide maximum power density, but it also has better control performance and functionality. The modular concept also offers numerous expansion options as well as absolute rotation of ethercat based on the ethernet interface. Epos2 p Programming Position Controller Overview of the epos2 slave version of the controller. It is suitable for continuous output power up to 120 W with increment standalone
10 Shocking Celeb Beauty Secrets They Don’t Want You to Know
Position mode (travel incremental): Press and hold the jog button, and the axis will automatically stop after running to the target position at the set speed. The jog function of the control panel is limited to the speed mode, and the position mode needs to be set using the expert parameter table. To execute the jog function, it should.
