This function allows you to store the set setting values into a setting file, and you can choose to save the setting file in bios or select "select file in hdd/fdd/usb" to copy the setting file to your storage device. After the settings are completed, you must enter the administrator or user password to enter the boot process when you turn on the computer. Unlike the user password, the administrator password allows you to enter the bios setup program to modify all settings. System setting values and loading operating system, etc. BIOS contains a BIOS setup program for users to set system parameters according to their needs, so that the power required to store CMOS data is supplied by the lithium battery on the motherboard, so when the system power is turned off, these data will not be stored.
Bourbon County Law Enforcement Center Ft. Scott, KS
Under Advanced, there are south bridge and north bridge settings. Under south bridge are network, hard disk mode and other settings; under north bridge are graphics card settings and memory settings; lvds/lcd setting items are generally in north bridge settings; This function allows you to store the set settings into a settings file, and you can choose to save the settings file in bios or select "select file in hdd/fdd/usb" to copy the settings file to your storage device. If the operating system you want to install requires additional installation of the raid controller driver during the installation process, please refer to the following steps: Step 1: Go to the GIGABYTE website, search for the product page of this motherboard model, and go to "Support and Downloads\Downloads\sata raid/ahci".
Allows you to set the administrator's password. In this option, press the key and enter the password to be set. The bios will ask you to enter it again to confirm the password. After entering, press the key again. After the setting is completed, you must enter the administrator or user password when turning on the computer.</p>
